The hinges are 2 1/2" long X 11/16" wide pin hinges. The display case sides
are 3/4" wide. My problem is that after installing the hinges the doors
never seem to close correctly, I have tried double backed tape to hold them
in place while I adjust the doors square or tacking them with hot glue as
mentioned in some magazines, but the hinges move slightly before I can drill
the holes.
mike
"RWM" <[email protected]> wrote in message
news:[email protected]...
>
> "cc0270207" <[email protected]> wrote in message
> news:[email protected]...
> > need help on aligning hinges on display cases. can't seem to get the
> doors
> > to line up correctly.
> >
> > thanks
> > mike
> >
> >
>
> You should describe the type of hinges that you have and a better
> description of the exact problem. Doesn't line up correctly could be a
lot
> of different things
>
> Bob
>
>
On Wed, 7 Apr 2004 16:31:05 -0700, "cc0270207"
<[email protected]> wrote:
>The hinges are 2 1/2" long X 11/16" wide pin hinges. The display case sides
>are 3/4" wide. My problem is that after installing the hinges the doors
>never seem to close correctly, I have tried double backed tape to hold them
>in place while I adjust the doors square or tacking them with hot glue as
>mentioned in some magazines, but the hinges move slightly before I can drill
>the holes.
>
measure, layout, measure, cut
"cc0270207" <[email protected]> wrote in message
news:[email protected]...
> need help on aligning hinges on display cases. can't seem to get the
doors
> to line up correctly.
>
> thanks
> mike
>
>
You should describe the type of hinges that you have and a better
description of the exact problem. Doesn't line up correctly could be a lot
of different things
Bob