Any experience with Lee Valley Cabinetmaker's Glue 2002 GF

Hi AW,
What do you use for marquetry & bent lams? Thanks, JG

A Dubya wrote:

> Hey Paul,
>
> Yip, no probs with it. Use lots of it, daily. I use other products for
> vacuum work/marquetry/bent lams though.
>
> Cheers,
>
> aw

Hey Paul,

Yip, no probs with it. Use lots of it, daily. I use other products for
vacuum work/marquetry/bent lams though.

Cheers,

aw

Hey JG,

I stick (a little pun there) with Unibond 800 or the West System. Both are
top of the line in my opinion. Less shrinkage/swelling/springback issues.

The Unibond 800 comes from www.vaccupress.com and the West System, I pick up
at Lee Valley. The West System not only works great, but is a lot of fun.
You can dye it any color you want, and use it as a filler.

I was commissioned awhile back to do a childs bedroom set. I routed out
small geometric shapes on the pieces and filled them in with the west
system, dyed with a flouresent pallete of colors.

Anyways, both are a very reliable adhesive.

Cheers,

aw


"JGS" <[email protected]> wrote in message
news:[email protected]...
> Hi AW,
> What do you use for marquetry & bent lams? Thanks, JG
>

"Paul" <p_b_s_1at_a_t_t.net> wrote in message
news:[email protected]...
> Anyone here have any experience with Lee Valley Cabinetmaker's Glue 2002
GF?
>
> Opinions?

I use it all the time; flows easily, good working time.. I have some stuff
clamped up right now in fact. Never had a problem with it. Only time I did
not use it was when I needed water resistant and water proof.
--
Ed
[email protected]
http://pages.cthome.net/edhome

On Sun, 29 Feb 2004 20:34:36 GMT, "R. E. Engerman" <[email protected]>
wrote:

>
>"Paul" <p_b_s_1at_a_t_t.net> wrote in message
>news:[email protected]...
>> Anyone here have any experience with Lee Valley Cabinetmaker's Glue 2002
>GF?
>>
>> Opinions?
>>
>
>Is it just for making cabinets or can it be used for other stuff? I'm going
>to make some kitchen cabinets so that may be a good glue for me.
>
>Ralph Engerman
>R. E. Quick Transit
>



it should work fine for mounting craftsman saw motors to the underside
of unisaw iron tops....

"Paul" <p_b_s_1at_a_t_t.net> wrote in message
news:[email protected]...
> Anyone here have any experience with Lee Valley Cabinetmaker's Glue 2002
GF?
>
> Opinions?
>

Is it just for making cabinets or can it be used for other stuff? I'm going
to make some kitchen cabinets so that may be a good glue for me.

Ralph Engerman
R. E. Quick Transit