I came across an ad for a Vo-tech school equipment auction in a
Pennsylvania school publication. BIDS ARE DUE BY 12-23-03 at 1:00.
This will not have had wide spread distribution, so a gloatable deal
might be possible. I have no relation to the school selling these
items. It is across the state from me and there is too much stuff for
me, but others may want these items. " Sealed bids are being accepted
for the following equipment:
- Do-all Verticle bandsaw
- Kalamazoo horizontal bandsaw
- Rockwell pedistal drillpress
- Bridgeport verticle milling machine
- Cintimill horizontal milling machine
All equipment must be bid as a lot and is sold "as-is". Miminmum bid
is $800. Bidder must pay to remove equipment. Bids must be sealed and
plainly marked "Bid For Machine Shop Equipment".
Send to:
Bucks County Technical High School
610 Wistar Road
Fairless Hills, PAS 19030
Bid opening is December 23, 2003 at 1:00 PM in Room K-110. Contact
Isabel Miller, Business Manager, at (215) 949-1700 EXT 2915."
Dave Hall
You did damm good!
Thanks, Tony D.
"vmtw" <[email protected]> wrote in message
news:[email protected]...
> [email protected] (David Hall) wrote in message
news:<[email protected]>...
> http://www.vmtw.com/shop/Tools_from_shop.htm
> I won the above three items at a school auction earlier this month
> $226 for the Powermatic lathe
> $76 each for the RAS's
> Scott
[email protected] (David Hall) wrote in message news:<[email protected]>...
> I came across an ad for a Vo-tech school equipment auction in a
> Pennsylvania school publication. BIDS ARE DUE BY 12-23-03 at 1:00.
> This will not have had wide spread distribution, so a gloatable deal
> might be possible. I have no relation to the school selling these
> items. It is across the state from me and there is too much stuff for
> me, but others may want these items. " Sealed bids are being accepted
> for the following equipment:
>
> - Do-all Verticle bandsaw
> - Kalamazoo horizontal bandsaw
> - Rockwell pedistal drillpress
> - Bridgeport verticle milling machine
> - Cintimill horizontal milling machine
>
> All equipment must be bid as a lot and is sold "as-is". Miminmum bid
> is $800. Bidder must pay to remove equipment. Bids must be sealed and
> plainly marked "Bid For Machine Shop Equipment".
>
> Send to:
> Bucks County Technical High School
> 610 Wistar Road
> Fairless Hills, PAS 19030
>
> Bid opening is December 23, 2003 at 1:00 PM in Room K-110. Contact
> Isabel Miller, Business Manager, at (215) 949-1700 EXT 2915."
>
> Dave Hall
http://www.vmtw.com/shop/Tools_from_shop.htm
I won the above three items at a school auction earlier this month
$226 for the Powermatic lathe
$76 each for the RAS's
Scott