I volunteered to builkd a workbench for my 4-year old's pre-k class.
The teacher's want to leave it outside, on a covered deck. We're in
Chicago. The ceiling is pretty high, so I expect it will get rained
and/or snowed upon. The teacher expects no more than two or three
kids ( 3-5 years old) to use it at once.
Because it'll be left outside, and not be moved it could be too heavy
to carry. It doesn't need a vise, it's really only for the kids to
pound on. I'll probably supply some small wooden mallets, or other
similiar pounding instraments.
Any ideas as to good material for the bench would be appreciated. I
think a redwood, cedar or even steel base would be fine, but it's the
top that I'd like some help with. It should remain passibly flat,
resist splintering and be generally impervious to weather.
Thanks,
Alan
"sadler" <[email protected]> wrote in message
news:[email protected]...
>I volunteered to builkd a workbench for my 4-year old's pre-k class.
> The teacher's want to leave it outside, on a covered deck. We're in
> Chicago. The ceiling is pretty high, so I expect it will get rained
> and/or snowed upon. The teacher expects no more than two or three
> kids ( 3-5 years old) to use it at once.
>
> Because it'll be left outside, and not be moved it could be too heavy
> to carry. It doesn't need a vise, it's really only for the kids to
> pound on. I'll probably supply some small wooden mallets, or other
> similiar pounding instraments.
>
> Any ideas as to good material for the bench would be appreciated. I
> think a redwood, cedar or even steel base would be fine, but it's the
> top that I'd like some help with. It should remain passibly flat,
> resist splintering and be generally impervious to weather.
>
> Thanks,
>
> Alan
Maybe that decking composite material?
Dave
On Fri, 13 Jan 2006 04:38:04 -0500, "Lee Michaels"
<leemichaels*nadaspam*@comcast.net> wrote:
>
>"TeamCasa" <[email protected]> wrote in message
>news:[email protected]...
>>
>> "sadler" <[email protected]> wrote in message
>> news:[email protected]...
>>>I volunteered to builkd a workbench for my 4-year old's pre-k class.
>>> The teacher's want to leave it outside, on a covered deck. We're in
>>> Chicago. The ceiling is pretty high, so I expect it will get rained
>>> and/or snowed upon. The teacher expects no more than two or three
>>> kids ( 3-5 years old) to use it at once.
>>>
>>> Because it'll be left outside, and not be moved it could be too heavy
>>> to carry. It doesn't need a vise, it's really only for the kids to
>>> pound on. I'll probably supply some small wooden mallets, or other
>>> similiar pounding instraments.
>>>
>>> Any ideas as to good material for the bench would be appreciated. I
>>> think a redwood, cedar or even steel base would be fine, but it's the
>>> top that I'd like some help with. It should remain passibly flat,
>>> resist splintering and be generally impervious to weather.
>>>
>>> Thanks,
>>>
>>> Alan
>>
>> Maybe that decking composite material?
>> Dave
>If you are going to decking material, why not ipe??
>
>
I've never used ipe, but I was thinking about it. I hear it's hard to
cut and work with, but very durable and weather resistant. Since it's
board stock, should I figure out how to bolt it together for the base
as well? Is it dimensionally stable enough to use as the base?
"TeamCasa" <[email protected]> wrote in message
news:[email protected]...
>
> "sadler" <[email protected]> wrote in message
> news:[email protected]...
>>I volunteered to builkd a workbench for my 4-year old's pre-k class.
>> The teacher's want to leave it outside, on a covered deck. We're in
>> Chicago. The ceiling is pretty high, so I expect it will get rained
>> and/or snowed upon. The teacher expects no more than two or three
>> kids ( 3-5 years old) to use it at once.
>>
>> Because it'll be left outside, and not be moved it could be too heavy
>> to carry. It doesn't need a vise, it's really only for the kids to
>> pound on. I'll probably supply some small wooden mallets, or other
>> similiar pounding instraments.
>>
>> Any ideas as to good material for the bench would be appreciated. I
>> think a redwood, cedar or even steel base would be fine, but it's the
>> top that I'd like some help with. It should remain passibly flat,
>> resist splintering and be generally impervious to weather.
>>
>> Thanks,
>>
>> Alan
>
> Maybe that decking composite material?
> Dave
If you are going to decking material, why not ipe??