Hi,
Could anyone provide me with the part number for a complete cutter
head assembly for a Rockwell 13" planer, model 22-432 or 22-401. This
is a floor mounted planer made from about the early '70s thru mid
'80s. Complete cutter head assembly comes with knives, gibs, bearings
and carriers. I couldn't find any older parts manuals on mfgr's
website.
Thanks for any help.
Jim S.
Try Ace Tool Repair at powetoolparts.ca.
GTO(John)
>Hi,
>Could anyone provide me with the part number for a complete cutter
>head assembly for a Rockwell 13" planer, model 22-432 or 22-401. This
>is a floor mounted planer made from about the early '70s thru mid
>'80s. Complete cutter head assembly comes with knives, gibs, bearings
>and carriers. I couldn't find any older parts manuals on mfgr's
>website.
>Thanks for any help.
>Jim S.
On 01/28/2004 12:42 PM, in article
[email protected], "GTO69RA4" <[email protected]>
opined:
> Try Ace Tool Repair at powetoolparts.ca.
>
> GTO(John)
>
>> Hi,
>> Could anyone provide me with the part number for a complete cutter
>> head assembly for a Rockwell 13" planer, model 22-432 or 22-401. This
>> is a floor mounted planer made from about the early '70s thru mid
>> '80s. Complete cutter head assembly comes with knives, gibs, bearings
>> and carriers. I couldn't find any older parts manuals on mfgr's
>> website.
>> Thanks for any help.
>> Jim S.
Or send an email to Delta, all those manuals are in .pdf format now.
--
============================================================================
"Unless you can point your finger at the man responsible when something goes
wrong, then you have never had anyone really responsible," Adm. Hyman
Rickover.
============================================================================