Looking For An Owner's Manual

Did you try www.oldwwm.com. ? I found everything I needed for a 40+ year
old Craftsman table saw!

--
In golf, it's not the score that counts--it's the company!

On Mon, 12 Jan 2004 22:52:04 -0500, "Mike Marlow"
<[email protected]> wrote:

>I just picked up a Craftsman 6 1/8in jointer/planer model number 113-206933.
>I've looked around on Sear's web site and on an old time tool web site and
>cannot find a manual for this jointer. Any ideas? I appreciate any
>feedback.

Do what I did when I recently purchased an older RAS. Call the
manufacturer and ask. They might just sned one to you for free.

Chris Mooney

Mike,

Back in the early 1990's I was able to have Emerson Electric (the
manufacturer of most of the early craftsman stationary tools) fax me more
than a couple original owners manual. Contact their Special Products
Division. The world headquarters is

8100 West Florissant Avenue, Saint Louis, MO 63136
(314) 553-2000

Their Fax number at that time at the special products division was
1-800-525-7248 and the phone number on the cover sheet was 314-595-1376

Good Luck


--
Dennis Slabaugh, Hobbyist Woodworker
www.woodworkinghobby.com


"Mike Marlow" <[email protected]> wrote in message
news:[email protected]...
> I just picked up a Craftsman 6 1/8in jointer/planer model number
113-206933.
> I've looked around on Sear's web site and on an old time tool web site and
> cannot find a manual for this jointer. Any ideas? I appreciate any
> feedback.
>
> --
>
> -Mike-
> [email protected]
>
>

Mike Marlow wrote:
> My thanks to the guys who replied. I have an even older Sears
> jointer that I was going to put together and at one time I thought
> for sure I had found a site that contained manuals for a huge amount
> of older Sears Craftsman products - doggoned if I can find it now.
> Oh well - that site did not have a manual for the other jointer I
> have so it'd have just been my luck that I would not find a manual
> on-line for this jointer, either. I do appreciate the feedback and
> will see what I can get from some of the options suggested by those
> who replied.


http://www.oldwwmachines.com/MfgIndex/detail.asp?ID=222&PubNum=63&#Publications



--
Mortimer Schnerd, RN

[email protected]
http://www.mortimerschnerd.com

"Mike Marlow" <[email protected]> wrote in message
news:[email protected]...
> I just picked up a Craftsman 6 1/8in jointer/planer model number
113-206933.
> I've looked around on Sear's web site and on an old time tool web site and
> cannot find a manual for this jointer. Any ideas? I appreciate any
> feedback.
>
> --
>
> -Mike-
> [email protected]
>
>

Go to www3.sears.com. The manual P/N is 67096 and it will cost you $7.49.
You might find it on OWWM for a free download.

Tom

This is an e mail address, They should have a copy for you.
[email protected]
Tony D.
> On Mon, 12 Jan 2004 22:52:04 -0500, "Mike Marlow"
> <[email protected]> wrote:
>
> >I just picked up a Craftsman 6 1/8in jointer/planer model number
113-206933.
> >I've looked around on Sear's web site and on an old time tool web site
and
> >cannot find a manual for this jointer. Any ideas? I appreciate any
> >feedback.

In news:[email protected],
Mike Marlow <[email protected]> burped and spewed forth the
following:
> I just picked up a Craftsman 6 1/8in jointer/planer model number
> 113-206933. I've looked around on Sear's web site and on an old time
> tool web site and cannot find a manual for this jointer. Any ideas?
> I appreciate any feedback.

My thanks to the guys who replied. I have an even older Sears jointer that
I was going to put together and at one time I thought for sure I had found a
site that contained manuals for a huge amount of older Sears Craftsman
products - doggoned if I can find it now. Oh well - that site did not have
a manual for the other jointer I have so it'd have just been my luck that I
would not find a manual on-line for this jointer, either. I do appreciate
the feedback and will see what I can get from some of the options suggested
by those who replied.

-Mike-